-TTLKTUN -Toytec Aluma Series Boss Suspension System with 2.5 Coilovers (07-21 Tundra) 2"-3" Lift
Brand
Toytec Lifts
Part Number
TTLKTUN
From $2,022.98
To $3,851.91
Vehicle Fitment:
- 07-21 Tundra
Fitment Notes:
***This configuration is for use exclusively with aftermarket upper control arms to accommodate between 2'' to 3'' of lift***
In the Denver area? We install! Call today to schedule a time.
TTLKTUN - Toytec Aluma Series 2.5 Complete Performance 3" Lift Kit for 2007-2021 Tundra
This kit offers excellent performance, while providing great handling on and off road.
TTLKTUN Includes:
- Front:
- Toytec 2.5 Aluma Series Coilovers
- The shock bodies are made from hard anodized aluminum for cooler operation as well as better protection from the elements.
- Adjustable from 2-3" of lift
- Internal hydraulic valving optimized to match the 700 lb rate spring for use with or without a bumper or winch.
- Coilovers are assembled and ready to bolt on. No spring compressor or special tools needed for installation.
- Shock bodies are 2.5" in diameter providing additional oil over standard OEM shocks.
- This kit includes preload adjustment tool and owner's manual.
- TTLKTUN has a nitrogen charged design with internal floating piston to help prevent shock fading and cavitation
- Heavy duty 19mm induction-hardened piston shaft.
- The shocks in TTLKTUN are fully rebuildable
- Front Diff Drop Kit:
- Front Differential Drop Kit - Recommended for 4x4 models. Subtract from drop down for 2WD models.
- Front Durobumps Bump Stops:
- DuroBumps bump stops for the 2nd & 3rd Gen Tundra are proudly made in the USA with heavy-duty dual durometer rubber to provide a smoother progressive dampening—greatly reducing hard bottom outs. Gain better off road control and comfort vs harsh-on-contact OEM bump stops. Upgrade your truck to 100% eliminate that damaging shell-shock effect from hitting those larger bumps.
- Rear Durobumps Bump Stops:
- DuroBumps bump stops for the 1st Gen Tundra are proudly made in the USA with heavy-duty dual durometer rubber to provide a smoother progressive dampening—greatly reducing hard bottom outs. Gain better off road control and comfort vs harsh-on-contact OEM bump stops. Upgrade your truck to 100% eliminate that damaging shell-shock effect from hitting those larger bumps.
- Rear Shocks:
- LK207R-P - Toytec 2.0 Aluma Series Rear shocks designed for 1-3" lift. Shock bodies are hard-anodized aluminum for cooler operation and longer lasting in the elements. Fully rebuildable. Perfect match to our Aluma coilovers.
- Rear Lift:
- Toytec Rear Adjustable Shackles. Adjustable for 1" or 1.5" of lift. Lower shackle spring bushings are included.
-
Shackle fit notes:
- **For vehicles with the TRD Exhaust, the exhaust will need to be modified to work with shackles.
-
** We have seen a few models which may require minor grinding on the bolts which interfere with the shackle at the 1" setting.
-
- BK-15 - Toytec 1.5" Rear Block Kit (includes U-bolts and ebrake cable extension brackets)
- P10047U-P - Toytec 2" lift rear leaf springs. Replace your worn out leaf pack. Ready to bolt in. Bushings are pressed in. Includes new ubolts.
- Toytec Rear Adjustable Shackles. Adjustable for 1" or 1.5" of lift. Lower shackle spring bushings are included.
- Upper Control Arms:
- Tuff Country Ball Joint Style Upper Control Arms with - 50936. Built in additional caster to correct alignment. Heavy duty Grease-able sealed ball joint for low maintenance and quiet operation.
- Tuff Country Uniball Style Upper Control Arms - 50931. Improve your lifted Tundra's suspension travel, performance and eliminate any binding that can be caused by factory ball joints with these high quality uni-ball upper control arms.
- SPC Adjustable Upper Control Arms - 25490 - The most adjustable UCA on the market. Correct your alignment angles. Also great for adjusting for tire clearance.
| Manufacturer | Toytec Lifts |
|---|
(Size: 930.5 KB)
Adjusting Preload on Aluma Series Coilovers
Check items to add to the cart or
