-TTBOSSTAC-2005ALM - Toytec Aluma Series Boss Suspension System (05-15 Tacoma) 2"-3" Lift

TTBOSSTAC-2005ALM - Toytec Boss Aluma Series Suspension System for 2005-2015 Tacoma

***This configuration is for use exclusively with aftermarket upper control arms to accommodate between 2'' to 3'' of lift*** 

Introducing Aluma Series to our lineup.  The Aluma Series Coilovers still provide the same great ride quality as our current Boss line but offer additional benefits. 

TTBOSSTAC-2005ALM Includes:

• Toytec Front 2.0 Aluma Series Coilovers
• The shock bodies are made from hard anodized aluminum for cooler operation as well as better protection from the elements.
• Adjustable from 2-3" of lift
• Internal hydraulic valving optimized to match the 700 lb rate spring for use with or without a bumper or winch.
• Coilovers are assembled and ready to bolt on.  No spring compressor or special tools needed for installation.
• This TTBOSSTAC-2005ALM kit includes sway bar relocation brackets, preload adjustment tool and owners manual.
• The coilovers come with a nitrogen charged design with internal floating piston to help prevent shock fading and cavitation
• Heavy duty 16mm induction-hardened piston shaft.
• These shocks are fully rebuildable

Front Differential Drop Kit:

• TAC-DR-05 - Front Differential Drop Kit **Recommended for all lifted 4x4 Tacoma's

Rear Lift Options:

• Toytec 2” Add-A-Leafs. - This long style single AAL offers a great ride and has anti-friction pads already installed. Fits standard 3 leaf springs and 4 leaf or TSB springs.
• Toytec Progressive Leaf Pack- Designed and produced to the highest standards.  Spring retaining clamps on both ends keeps the pack centered. Anti-friction pads on both ends reduce any noises.This is the best riding AAL on the market.**Use with your stock overload for about 2.5” of rear lift and extra rear weight. May be used without the factory overload for best ride quality and about 2” of rear lift. 
• Toytec Boss Leaf Springs- 2" lift - These rear springs offering soft ride leaf spring for maximum flex and articulation. 10 leaf design for the best ride comfort and articulation.Tapered diamond cut ends provide less stress for longer spring life.  Comes with high quality urethane bushings already installed.

• Includes Rear Axle Shims for proper pinion angle alignment
• Longer U-bolts also included

Rear Shock Options:

• LKTAC20R - Toytec 2.0 Aluma Series Rear Shocks designed for 1-3" lift.  Shock bodies are hard-anodized aluminum for cooler operation and longer lasting in the elements.  Fully rebuildable.  Perfect match to our Aluma Coilovers.  

Front Bump Stops:

• DuroBumps are proudly made in the USA with dual durometer (hardness) rubber that provides smooth progressive dampening and greatly reduces hard bottom outs. This allows for more control and comfort compared to OEM bump stops that are harsh on contact. With DuroBumps installed, the shell-shock effect experienced when hitting the OEM bump stops is completely eliminated.

Ubolts:  Choose from standard 7.5" ubolts or our ubolt flip kit.  The ubolt flip kit will allow you to turn your ubolts facing upward, providing additional ground clearance.  

Rear Bump Stops:

• Rear Bump Stop Extension kit- 43007 - Recommended for use with add-a-leafs or complete leaf spring packs, these will allow your factory rear bump stops to function with the lift.  (*Requires drilling 2 holes per side).  
• Durobumps - Tacoma rear bump stops eliminate the shell shock effect we’re all familiar with when hitting OEM bump stops. Our dual durometer bump stops easily absorb hard impacts and help keep the vehicle stable at higher speeds in rough conditions. The 4.25″ rear bump stop is intended for trucks with a rear lift of 2″ and extended shocks of up to 1″. These bump stops have been designed to stop wheel up travel under articulation prior to extended shocks bottoming out.  Can be used with or without the Ubolt flip kit.

 Add Upper Control Arms to complete your kit:

• Toytec Boxed Upper Control Arms - Available with a sealed ball joint or uniball.  Designed to maximize the performance of our lift as well as correct alignment angles at 2-3" of lift.  
• Tuff Country Ball Joint Style Upper Control Arms - 50935 - Built in additional caster to correct alignment.  Heavy duty Grease-able sealed ball joint for low maintenance and quiet operation.