Brand
Toytec Lifts
Part Number
SEQ08K
From $1,853.87
To $2,939.81
Vehicle Fitment:
- 2008+ Sequoia
- Will not fit vehicles equipped with AVS or TEMS
Fitment Notes:
- Kit installation requires use of OEM Automotive Tools Coil Spring Compressor part # 27035 or similar style coil compressor.
- This configuration is for use exclusively with aftermarket upper control arms to accommodate between 2'' to 3'' of lift
SEQ08K - Toytec Complete Lift Kit for 2008-Current Toyota Sequoia
Front Aluma Series IFP Coilovers:
- Choose from 2.0 or 2.5 shock bodies.
- The shock bodies are made from hard anodized aluminum for cooler operation as well as better protection from the elements.
- Adjustable from 2-3" of lift
- Internal hydraulic valving optimized to match the 700 lb rate spring for use with or without a bumper or winch.
- Coilovers are assembled and ready to bolt on. No spring compressor or special tools needed for installation.
- This kit includes preload adjustment tool and owners manual.
- Nitrogen charged design with internal floating piston to help prevent shock fading and cavitation
- Heavy duty 16mm induction-hardened piston shaft..
- These shocks are fully rebuildable
- Aftermarket upper control arms are recommended.
Front Diff Drop Kit (4x4 Models)
- TU-DR-07 - For 4WD models - Designed to reduce the front cv axle angles on a lifted 4x4.
Rear:
- Rear 2” lift OME Coils to give you the correct rear height while maintaining 1” of rake with 3" of lift in the front.
- Rear Toytec Aluma 2.0 IFP Shocks.
- Two rear 1/8” Bump Stop spacers.
- Also includes one 80PR10 - Rear OME10mm trim spacer to be installed on the driver's side rear coil spring. This is designed to correct the driver side lean common on Toyota trucks and SUV's.
Add Upper Control Arms to complete your kit:
- SPC Adjustable Upper Control Arms - 25490 - The most adjustable UCA on the market. Correct your alignment angles. Also great for adjusting for tire clearance.
Manufacturer | Toytec Lifts |
---|